Cast steel pipe connectors, galvanised, 33.7 mm (1")

For every combined order of pipes and fittings, the shipping charges for the fittings are waived.
Street base 33.7 mm (1”)
A ground sleeve pipe connector in concrete for securing the support pipe. This allows posts to be inserted and held in place with a locking set screw.
Product number 608054C

€33.85*
Eyelet section with single tab, 33.7 mm (1”)
Pipe connector for panel mounting.
Product number 608055C

€3.54*
Eyelet section with double tab, 33.7 mm (1”)
Panel mounting tube connector with two eyelets, also used for locking gates.
Product number 608056C

€4.74*
Adjustment ring, retaining ring, 33.7 mm (1”)
Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.
Product number 608060C

€1.78*
Adjustable ring with hook, 33.7 mm (1”)
Pipe connector for chain fastenings.
Product number 608061C

€3.66*
Adjustment ring diameter, 33.7 mm (1”)
Internal hinge pipe connector for Type 63.
Product number 608062C

€3.13*
Adjustment ring pin, 33.7 mm (1”)
External hinge pipe connector, for use in combination with Type 62.
Product number 608063C

€4.23*
Adjustable ring with hook 33.7 mm (1”)
Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.
Product number 608064C

€3.66*
Mesh holder, single 33.7 mm (1”)
Single-sided wire mesh clamp
Product number 608070C

€1.66*
Mesh holder, double, 33.7 mm (1”)
Double-sided wire mesh clamp
Product number 608071C

€2.35*
90° cross piece, combination size 42.4 mm (1¼”) – 33.7 mm (1”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028DC

€6.42*
90° cross-piece, combination size 48.3 mm (1½”) – 33.7 mm (1”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028EC

€6.60*
Articulated foot bracket (Unimass)
For fixing structures to walls or floors, usually in conjunction with Type 42.
Product number 608050

€4.52*
Elbow 15°–60° variable 33.7 mm (1”)
Elbow 15° - 60° variable. Elbow connector as an end stop for the top rail with a variable angle of 15° to 60°. Most commonly used for vertical supports on staircases.
Product number 608124C

€6.91*
Flag mount 33.7 mm (1”)
New to our range are the flag mounts. These mounts create a 45-degree angle so that the flagpoles protrude from the wall, allowing your flags to fly freely.
Product number 6080FP1

€10.67*
Elbow, adjustable. Variable elbow connector. 33.7 mm (1”)
This connector can be used as a corner with angles ranging from a minimum of 75 degrees to a maximum of 210 degrees.
Product number 608125C

€9.67*
Flag bracket 33.7 mm (1”)
This bracket creates a 45-degree angle so that the flagpole protrudes from the wall, allowing your flags to fly freely.
Product number 6080FP2

€16.04*
Horizontal wall bracket, extra heavy-duty 33.7 mm (1”)
Extra-heavy-duty pipe connection elbow for vertical posts. This clamp is not suitable for feeding pipes through. Designed for manual fixing of safety railings and balustrades to walls, parapets, stairs and slopes with a flat mounting.
Product number 608146C

€14.74*
Plastic screw cap grey for B / C
25 pieces per bag
Product number 608078BC

€6.99*
Container clamp 60.3 mm (2”)
For flagpoles at the front of the containerPipe connector for attaching a flagpole to a container, for a pole with a diameter of Ø 60 mm. Design: Surface treatment: galvanised. Suitable only for standard 20-foot shipping containers. Type 5080C3400F Size 60.3 mm Weight 1.400 kg
Product number 6080C3400F

€21.07*
Allen key for pipe connectors For B / C
For sizes B / C (size B: 3/4" = 26.9 mm) (size C: 1" = 33.7 mm)You only need a simple Allen key to assemble our pipe connectors. Available in various inch sizes.
Product number 608075BC

€1.10*
Container clamp 48.3 mm (1½”)
For the front of the containerPipe connector for securing frames or structures to the front of the container. Suitable only for standard 20-foot shipping containers.
Product number 6080C3400

€18.09*
Container clamp 48.3 mm (1½”)
For connecting the front ends of multiple containers Pipe connector for securing frames or structures to the front of the container, for mounting a large frame onto several containers.Suitable only for standard 20-foot shipping containers.
Product number 6080C3428

€23.14*
Certified specialist retailer

Certified specialist retailer

Here you benefit from expert advice, solutions tailored to your needs and genuine specialist expertise. Reliable after-sales service is guaranteed!
Your Tuboconex team of experts

Secure payment

Secure payment

You can pay by credit card, Apple Pay, Bancontact, Trustly and Bizum. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & construction planners

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this is a guarantee of quality, expertise and service.

Loading...
Files are being uploaded, please wait...
Loading…
Loading the web debug toolbar…
Attempt #