Go to the home page
0 €0.00*

Galvanised cast steel pipe connectors 42.4 mm (1¼")

For every combined order of pipes and fittings, the shipping charges for the fittings are waived.
A silver-coloured, cylindrical eyelet with a rough surface, clamped firmly around a vertical, smooth, shiny blue tube. On the left, a flat single tab with a circular hole protrudes. Tube connector for panel mounting.
Eyelet section with single tab 42.4 mm (1¼”)
Pipe connector for panel mounting.
Product number 608055D

€4.74*
Grey pipe clamp with double bracket: secures a blue pipe via a hex screw. Two flat brackets, each with a mounting hole.
Eyelet section with double tab 42.4 mm (1¼”)
Panel mounting tube connector with two eyelets; also used for locking gates.
Product number 608056D

€7.48*
A solid grey metal retaining ring clamps around a vertical blue tube at the centre. On the side is a clearly visible hexagon bolt for secure fastening to the tube. The ring increases friction and prevents slipping.
Adjustment ring, retaining ring 42.4 mm (1¼”)
Support tube connector for increasing the sliding resistance of heavily loaded tube connectors.
Product number 608060D

€2.19*
A silver-coloured adjustment ring with a sturdy, right-facing hook is clamped centrally around a vertical blue tube. The tube connector is used to securely attach chains or similar items to tubes and has a rough metal surface.
Adjustable ring with hook 42.4 mm (1¼”)
Pipe connector for chain fastenings.
Product number 608061D

€4.19*
A grey, sturdy adjustable ring eye pipe connector firmly attached to a blue pipe. It wraps around the pipe; a visible screw secures it in place. On the left, an open eyelet for attaching further elements. The metal has a slightly rough finish.
Adjustment ring diameter 42.4 mm (1¼”)
Internal hinge pipe connector, for Type 63.
Product number 608062D

€3.62*
A grey, sturdy adjustment ring pin, a pipe connector, is clamped around a vertical blue pipe. The external hinge pipe connector has a cylindrical rod protruding upwards and a fixing screw on the side to tighten it.
Adjustment ring pin. 42.4 mm (1¼”)
External hinge pipe connector, for use in combination with Type 62.
Product number 608063D

€4.66*
A sturdy silver metal spacer ring with a polished finish, clamped securely around a blue tube. A downward-curving hook is integrated at the bottom; it is sturdy and suitable for hanging. For tubes with a diameter of 26.9 mm (¾ inch).
Adjustable ring with hook 42.4 mm (1¼”)
Similar to tube connector Type 61, particularly suitable for the construction of coat stands and similar items.
Product number 608064D

€4.19*
A silver, U-shaped grille bracket connects a dark blue grille to a round, blue metal post. The bracket encircles the post and is securely fastened to the grille with a screw.
Mesh holder, single 42.4 mm (1¼”)
Single-sided wire mesh clamp
Product number 608070D

€2.02*
A galvanised double mesh holder, a double-sided wire mesh clamp, is mounted centrally on a vertical blue post. It secures two dark wire meshes on both sides and is fastened with two screws.
Mesh holder, double, 42.4 mm (1¼”)
Double-sided wire mesh clamp
Product number 608071D

€2.35*
Sturdy, silver-coloured elbow connector made of galvanised metal, connects two blue tubes at a variable angle. Two hexagon head screws at the top for securing. Ideal for handrails/vertical supports, 42.4 mm (1¼”) tube.
Elbow 15°–60° variable 42.4 mm (1¼”)
Elbow connector as an end stop for the upper railing with a variable angle of 15° to 60°. Most commonly used for vertical supports on staircases.
Product number 608124D

€10.34*
Silver-grey, adjustable metal elbow connector, connects two blue tubes at an adjustable angle. Sturdy elbow with pivot point and fixing screws. Adjustable from 75° to 210°, for 33.7 mm (1”) tubes.
Elbow, adjustable, 42.4 mm (1¼”)
Variable elbow connector. This connector can be used as a corner from a minimum of 75 degrees to a maximum of 210 degrees.
Product number 608125D

€12.86*
A silver metal crosspiece connects two blue pipes; one runs vertically, the other diagonally at a 45-degree angle. The clamp is secured with screws that hold the pipes firmly in place and allow for a slope.
Cross piece for 45° slope, 42.4 mm (1¼”)
Connecting clamp between the central rail and the rail posts for sloping rails with a fixed angle of up to 45°
Product number 608126D

€14.84*
Galvanised, extra-heavy-duty wall bracket for pipes with a blue, vertical post. Two hex socket screws secure the pipe in the cylindrical clamp. Flat brackets with round holes for fixing.
Horizontal wall bracket, extra heavy-duty 42.4 mm (1¼”)
Extra-heavy-duty pipe connection elbow for vertical posts. This clamp is not suitable for feeding pipes through. Designed for manual fixing of safety railings and balustrades to walls, parapets, stairs and slopes with a flat mounting.
Product number 608146D

€19.85*
Extra-heavy, galvanised step edge footplate for fixing with a blue, vertical tube in the central clamping area. Rectangular base with 2 fixing holes, side flanges each with 2 slotted holes. Tube with 2 hex socket screws.
Step edge base plate 42.4 mm (1¼”)
Extra-heavy base plate for fixing to a step. Most commonly used on roofs.
Product number 608147D

€30.64*
Grey metal T-piece for 21.3 mm pipes connects two blue pipes. One pipe runs horizontally through the upper opening, the other vertically downwards. Two hexagon head screws secure the pipes in the connector.
Short T-piece, combination dimensions: horizontal 48.3 mm (1½”) – vertical 42.4 mm (1¼”)
Same as Type 2, but this version is used to connect pipes of different diameters.
Product number 608002ED

€6.70*
A silver-coloured cross-connector (cross-piece) connects two blue tubes at a 90-degree angle: one vertically, one horizontally. Secured with hex socket screws, ideal for stable tube junctions.
90° cross piece, combination sizes 48.3 mm (1½”) – 42.4 mm (1¼”)
Same pipe connector as Type 28, but with this pipe connector you can assemble structures using two different pipe diameters.
Product number 608028ED

€7.69*
Grey metal articulated foot holder with a rectangular mounting plate and two drill holes for secure wall or floor mounting. An eyelet with a hole in the centre serves as a movable pivot point. Matt, textured finish.
Articulated foot bracket (Unimass)
For fixing structures to walls or floors, usually in conjunction with Type 42.
Product number 608050

€4.52*
Silver-coloured L-shaped pipe connector that joins two blue pipes at a 90-degree angle. The metal elbow has a rough surface and several hex socket screws for securing. Three openings.
Eaves elbow 42.4 mm (1 1/4”)
This pipe connector is required for roof structures, usually in combination with type 91.
Product number 608085D

€16.02*
Grey, cross-shaped metal pipe connector, connects four blue pipes at a 90° angle. The pipes fit securely into the openings and are secured with hexagon head screws. For stabilising structures, e.g. eaves top piece.
Eaves cap 42.4 mm (1 1/4”)
This pipe connector is required for roof structures, usually in combination with Type 85.
Product number 608091D

€13.16*
Silver metal elbow connector, connects two blue tubes at a variable angle (approx. 45°). Smooth, robust, slightly textured. Allen screws at both ends for securing the tubes. Often used as an end stop for handrails/railings.
Curved connector 40°–70°, adjustable. 42.4 mm (1 1/4”).
Elbow connector as an end stop for the upper railing with a variable angle of 40° to 70°. Most commonly used for stair railings.
Product number 608123D

€14.80*
An open cross-piece made of grey metal connects two blue pipes. The upper pipe runs diagonally through the upper opening, whilst the lower pipe lies horizontally beneath it and is held in place by the lower clamp. A clamping screw is visible.
Open cross piece with 42.4 mm (1 1/4”) insert
Open cross piece in which the crossbar is inserted into the insert and then tightened.
Product number 608201D

€10.96*
A transparent plastic bag filled with lots of grey plastic screw caps. Each cap has a flat, round top and a cylindrical insert. The grey caps are evenly distributed.
Plastic screw cap grey
(25 pieces per bag) For D / E / F
Product number 608078DEF

€9.26*
Polished stainless steel adjusting screw, shown from three angles. Cylindrical, with external thread and deep hex socket. 1/4-inch screw for pipe connectors, shown in side and top views.
Stainless steel adjusting screws for pipe connectors. 3/8” (for D / E / F)
Product number 608076DEF

€2.31*
Black, L-shaped Allen key shown diagonally on a white background. Two arms: short arm pointing up and to the left, long arm pointing down and to the right. Hexagonal tips. For fitting pipe connectors.
Allen keys for pipe connectors for D / E / F
All you need to install our pipe connectors is a standard Allen key. Available in various inch sizes: D: 1 1/4" (42.4 mm) Size E: 1 1/2" (48.3 mm) Size F: 2" (60.3 mm)
Product number 608075DEF

€1.33*
Certified specialist retailer

Certified specialist retailer

Here you benefit from expert advice, solutions tailored to your needs and genuine specialist expertise. Reliable after-sales service is guaranteed!
Your Tuboconex team of experts

Secure payment

Secure payment

You can pay by credit card, Apple Pay, Bancontact, Trustly and Bizum. Your payment is always processed via an SSL-encrypted connection.

tuev-sued.jpg

TÜV tested

Our pipe connectors are high quality and TÜV-certified.

architekten_siegel.jpg

Recommended by architects & construction planners

Recommended by industry experts and practitioners due to reliable, high-performance quality. For you as a customer, this is a guarantee of quality, expertise and service.

This website uses cookies to provide the best possible experience. More information ...
Loading...
Files are being uploaded, please wait...
Loading…
Loading the web debug toolbar…
Attempt #